Всё про Linux

Список разделов Общие разделы Оффтопик

Описание: Разговоры обо всём
Модератор: exooman

Сообщение #2721 grayich » 22.06.2017, 21:25

ага, ну ладно, продолжу клеить камеру велика)
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

  • 1

Сообщение #2722 andreymal » 23.06.2017, 09:28

andreymal писал(а):А камера выбирается. Но так сходу не помню где именно
Ой, я внезапно вспомнил, что хотел вспомнить и скриншот вбросить))) Вот тут, под плюсиком оно https://i.imgur.com/yDbU4m2.png
Читая эту подпись, вы впустую потратили 5 секунд своей жизни.
andreymal M
Аватара
Сообщения: 969

Сообщение #2723 Юрий Небесный » 23.06.2017, 10:16

grayich,
libmypaint-git пересобрал, gegl-git поставил. Всеравно не собирается Гимп

Изображение

[dez@dez-work ~]$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Нет такого файла или каталога
но я нашел че-то такое, оно не оно?
Спойлер
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 375.39 (buildmeister@swio-display-x86-rhel47-09) Tue Jan 31 20:47:44 PST 2017

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "1"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection


Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection

[dez@dez-work ~]$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GK208 [GeForce GT 710B] (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation GK110 [GeForce GTX 780] (rev a1)

Драйвера на вторую видяху по прежнему нет. В растерянности, у меня горит как надо в гимпе воротить дела великие... Думаю может даже на минт вернуться, но не хочется, мне так нравится из аура парочка программок
Elementary OS Loki | Dell Inspiron 7000 | Wacom
Донат в Blender Foundation, всего: 29 €
Дизайн в linux: http://vk.com/designlinux
Юрий Небесный M
Аватара
Сообщения: 1244

Сообщение #2724 try_out » 23.06.2017, 10:24

andreymal писал(а):Ой, я внезапно вспомнил, что хотел вспомнить и скриншот вбросить))) Вот тут, под плюсиком оно
Прикольно, во время звонка выбирается. Вононочё! :)
Спасибо. :oD
ASUS N53Jg /Linux Mint 18.2 Mate 64-bit
try_out M
Аватара
Откуда: РФ, Башкирия
Сообщения: 2064

  • 1

Сообщение #2725 grayich » 23.06.2017, 10:59

Юрий Небесный, но я нашел че-то такое, оно не оно? -- чёто такое это какое? ))
ls -R /etc/X11 покаж

насчёт gimp щас пересоберу у себя, проверю собирается ли, есть вероятность что на текущий момент поломан и не собирается, версия то в разработке активной)

после чего, если соберётся, то могу просто пакет дать
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Сообщение #2726 Юрий Небесный » 23.06.2017, 11:03

grayich,
ls -R /etc/X11
Спойлер
[dez@dez-work ~]$ ls -R /etc/X11
/etc/X11:
mhwd.d xinit xorg.conf.d

/etc/X11/mhwd.d:
nvidia.conf nvidia.conf.nvidia-xconfig-original

/etc/X11/xinit:
xinitrc xinitrc.d xserverrc

/etc/X11/xinit/xinitrc.d:
40-libcanberra-gtk-module.sh 50-systemd-user.sh

/etc/X11/xorg.conf.d:
00-keyboard.conf 90-mhwd.conf
[dez@dez-work ~]$

Добавлено спустя 8 минут 17 секунд:
grayich писал(а):чёто такое это какое? ))
это я тут нашел ))
/etc/X11/xorg.conf.d

Изображение
Elementary OS Loki | Dell Inspiron 7000 | Wacom
Донат в Blender Foundation, всего: 29 €
Дизайн в linux: http://vk.com/designlinux
Юрий Небесный M
Аватара
Сообщения: 1244

  • 1

Сообщение #2727 grayich » 23.06.2017, 11:33

кстати, забыл, ещё бабл-гит .. вот в целом что нужно пересобрать преред сборкой гимпа
Код: Выделить всё
yaourt -S libmypaint-git gegl-git babl-git
если будут затыки, то по одному в разной последовательности, кажись сначала нужно бабл потом гегл а потом либпаинт

по поводу видео, попробуй выполнить это
вдруг само включится)

Добавлено спустя 2 минуты 26 секунд:
тыкс, у меня gimp тоже сейчас не мобирается
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Сообщение #2728 Юрий Небесный » 23.06.2017, 11:42

grayich писал(а):тыкс, у меня gimp тоже сейчас не мобираетс
ееееемаееееее
Elementary OS Loki | Dell Inspiron 7000 | Wacom
Донат в Blender Foundation, всего: 29 €
Дизайн в linux: http://vk.com/designlinux
Юрий Небесный M
Аватара
Сообщения: 1244

  • 1

Сообщение #2729 grayich » 23.06.2017, 12:13

вообщем получилось сделать так
собрать libmypaint вместо libmypaint-git
после чего при сборке gimp-git на вопрос о редактировании PKBUILD ответить да и заменить зависимость libmypaint-git на libmypaint .. после чего всё собирается

незабудь перед установкой удалить libmypaint-git

вот на всякий случай пакеты, ставятся как yaourt -U имя_пакета
https://fex.net/#!559714501848
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Сообщение #2730 Юрий Небесный » 23.06.2017, 20:59

grayich писал(а):собрать libmypaint вместо libmypaint-git
интересное дело, но у меня только что на домашнем компе собрался с простым libmypaint.
и из всех гимпов, версия git самая лучшая. притащил с собой домой на выходные рабочий комп... полез его ковырять.
ты ничего не писал разрабам? может уже что то починили...
Elementary OS Loki | Dell Inspiron 7000 | Wacom
Донат в Blender Foundation, всего: 29 €
Дизайн в linux: http://vk.com/designlinux
Юрий Небесный M
Аватара
Сообщения: 1244

Сообщение #2731 grayich » 23.06.2017, 21:34

Юрий Небесный, зачем, этож версиИ в разработке, несобираемость - нормальное явление для -dev
через несколько дней вероятно опять будет собираться
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Сообщение #2732 Юрий Небесный » 23.06.2017, 22:06

ура ура, волшебный grayich помог!
Elementary OS Loki | Dell Inspiron 7000 | Wacom
Донат в Blender Foundation, всего: 29 €
Дизайн в linux: http://vk.com/designlinux
Юрий Небесный M
Аватара
Сообщения: 1244

  • 1

Сообщение #2733 grayich » 24.06.2017, 10:25

Юрий Небесный, сегодня обновился gimp-git в котором изменилась зависимость на mypaint вместо mypaint-git ) .. денёк подождали бы и само бы всё починилось)
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Сообщение #2734 БодрыйШурик » 25.06.2017, 11:15

Здравствуйте.
manjaro 17
Процессор amd fx 6300, 8 гигов оперативы на борту.
Видеокарта:
Спойлер
Graphics: Card: NVIDIA GK104 [GeForce GTX 660 Rev. 2]
Display Server: x11 (X.Org 1.19.3) driver: nvidia
Resolution: 1920x1080@60.00hz
GLX Renderer: GeForce GTX 660/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 375.66

Возникла проблема в некоторых играх.
Выражается она в непонятных микрофризах, причём исключительно в более старых играх.
Скажем, Тени Мордора идут стабильно и ровно, а контра и тф2 урывками.
Под спойлером выхлоп dmesg. (много текста)
Спойлер
[ 0.000000] Linux version 4.9.33-1-MANJARO (builduser@manjaro) (gcc version 7.1.1 20170516 (GCC) ) #1 SMP PREEMPT Sat Jun 17 14:07:44 UTC 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9-x86_64 root=UUID=335d661f-dbfa-47ac-8732-c00b5403e975 rw quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-78LMT-USB3/GA-78LMT-USB3, BIOS FA 04/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5ed0-0x000f5edf] mapped at [ffff8800000f5ed0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
[ 0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
[ 0.000000] BRK [0x01d5b000, 0x01d5bfff] PGTABLE
[ 0.000000] BRK [0x01d5c000, 0x01d5cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x372c3000-0x37958fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F78E0 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000CFDF3000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000CFDF3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000CFDF3100 00683B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CFDF0000 000040
[ 0.000000] ACPI: MSDM 0x00000000CFDF9A00 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 0x00000000CFDF9A80 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000CFDF9AC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 0x00000000CFDF9B00 000022 (v01 GBT GBT B0 5455312E BG?? 00000101)
[ 0.000000] ACPI: APIC 0x00000000CFDF9940 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 0x00000000CFDF9BA0 000D40 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22eff9000-0x22effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfdeffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
[ 0.000000] On node 0 totalpages: 2092430
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13240 pages used for memmap
[ 0.000000] DMA32 zone: 847344 pages, LIFO batch:31
[ 0.000000] Normal zone: 19392 pages used for memmap
[ 0.000000] Normal zone: 1241088 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfdf3000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88022ec00000 s103576 r8192 d31592 u262144
[ 0.000000] pcpu-alloc: s103576 r8192 d31592 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2059713
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9-x86_64 root=UUID=335d661f-dbfa-47ac-8732-c00b5403e975 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x2444000000-0x2445ffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 8085432K/8369720K available (6276K kernel code, 1078K rwdata, 1960K rodata, 1280K init, 1032K bss, 284288K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4218.538 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 8440.62 BogoMIPS (lpj=14061793)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20160831
[ 0.002184] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002208] Security Framework initialized
[ 0.002209] Yama: becoming mindful.
[ 0.002559] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004930] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006009] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.006016] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.006324] CPU: Physical Processor ID: 0
[ 0.006325] CPU: Processor Core ID: 0
[ 0.006326] mce: CPU supports 7 MCE banks
[ 0.006332] LVT offset 1 assigned for vector 0xf9
[ 0.006337] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.006337] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.006549] Freeing SMP alternatives memory: 24K (ffffffff81c4f000 - ffffffff81c55000)
[ 0.038415] ftrace: allocating 24856 entries in 98 pages
[ 0.045524] smpboot: Max logical packages: 2
[ 0.046022] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.182723] smpboot: CPU0: AMD FX(tm)-4350 Quad-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.182725] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.182729] ... version: 0
[ 0.182729] ... bit width: 48
[ 0.182730] ... generic registers: 6
[ 0.182730] ... value mask: 0000ffffffffffff
[ 0.182731] ... max period: 00007fffffffffff
[ 0.182731] ... fixed-purpose events: 0
[ 0.182731] ... event mask: 000000000000003f
[ 0.216117] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.249405] x86: Booting SMP configuration:
[ 0.249406] .... node #0, CPUs: #1 #2 #3
[ 0.554772] x86: Booted up 1 node, 4 CPUs
[ 0.554774] smpboot: Total of 4 processors activated (33761.35 BogoMIPS)
[ 0.559955] devtmpfs: initialized
[ 0.560011] x86/mm: Memory block size: 128MB
[ 0.562750] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
[ 0.562804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.562813] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.562866] pinctrl core: initialized pinctrl subsystem
[ 0.562899] RTC time: 6:09:01, date: 06/25/17
[ 0.562972] NET: Registered protocol family 16
[ 0.579392] cpuidle: using governor ladder
[ 0.592725] cpuidle: using governor menu
[ 0.592761] ACPI: bus type PCI registered
[ 0.592763] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.592814] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.592815] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.592826] PCI: Using configuration type 1 for base access
[ 0.593076] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.593076] mtrr: probably your BIOS does not setup all CPUs.
[ 0.593077] mtrr: corrected configuration.
[ 0.606184] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.606185] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.606402] ACPI: Added _OSI(Module Device)
[ 0.606403] ACPI: Added _OSI(Processor Device)
[ 0.606403] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.606404] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.610927] ACPI: Interpreter enabled
[ 0.610943] ACPI: (supports S0 S3 S4 S5)
[ 0.610944] ACPI: Using IOAPIC for interrupt routing
[ 0.611002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.614653] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.614657] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.614660] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.614852] PCI host bridge to bus 0000:00
[ 0.614854] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.614855] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.614856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.614857] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.614858] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[ 0.614859] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.614866] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.614876] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 0.614956] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.614988] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.615024] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.615058] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.615088] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.615123] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.615156] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[ 0.615186] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.615220] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.615267] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.615282] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
[ 0.615291] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.615299] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.615307] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.615315] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.615324] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.615343] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.615429] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.615441] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.615526] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.615559] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.615571] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.615656] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.615691] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.615706] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.615781] pci 0000:00:12.2: supports D1 D2
[ 0.615782] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.615817] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.615855] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.615866] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.615951] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.615983] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.615995] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.616082] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.616117] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.616132] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.616207] pci 0000:00:13.2: supports D1 D2
[ 0.616208] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.616243] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.616282] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.616418] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.616432] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.616440] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.616448] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.616456] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.616464] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
[ 0.616483] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.616484] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.616484] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.616485] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.616568] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.616586] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.616648] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.616683] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.616715] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.616837] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.616900] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.616933] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.616945] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[ 0.617029] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.617065] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.617125] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.617183] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.617241] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.617301] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.617358] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.617457] pci 0000:01:00.0: [10de:1195] type 00 class 0x030000
[ 0.617468] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.617477] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[ 0.617487] pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.617493] pci 0000:01:00.0: reg 0x24: [io 0xef00-0xef7f]
[ 0.617499] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.617587] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[ 0.617597] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
[ 0.626068] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.626071] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.626073] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.626075] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.626114] pci 0000:02:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.626126] pci 0000:02:00.0: reg 0x10: [mem 0xfdaff000-0xfdafffff 64bit]
[ 0.626180] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.636063] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.636065] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.636067] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.636069] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.636111] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.636125] pci 0000:03:00.0: reg 0x10: [io 0xce00-0xceff]
[ 0.636143] pci 0000:03:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit pref]
[ 0.636155] pci 0000:03:00.0: reg 0x20: [mem 0xfddf8000-0xfddfbfff 64bit pref]
[ 0.636218] pci 0000:03:00.0: supports D1 D2
[ 0.636218] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.646065] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.646067] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 0.646069] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.646071] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.646143] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.646146] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.646149] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.646152] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 0.646153] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.646154] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.646155] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.646156] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.646156] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[ 0.646348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.646385] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.646420] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.646455] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.646489] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.646523] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.646557] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.646592] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.647187] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.647188] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.647188] vgaarb: loaded
[ 0.647189] vgaarb: bridge control possible 0000:01:00.0
[ 0.647263] PCI: Using ACPI for IRQ routing
[ 0.655586] PCI: pci_cache_line_size set to 64 bytes
[ 0.655635] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.655636] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
[ 0.655637] e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
[ 0.655716] NetLabel: Initializing
[ 0.655717] NetLabel: domain hash size = 128
[ 0.655717] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.655727] NetLabel: unlabeled traffic allowed by default
[ 0.655783] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.655785] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.657833] clocksource: Switched to clocksource hpet
[ 0.663723] VFS: Disk quotas dquot_6.6.0
[ 0.663736] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.663794] pnp: PnP ACPI init
[ 0.663862] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.663863] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.663864] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.663867] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.664055] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.664079] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.664080] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.664081] system 00:01: [io 0x040b] has been reserved
[ 0.664082] system 00:01: [io 0x04d6] has been reserved
[ 0.664083] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.664084] system 00:01: [io 0x0c14] has been reserved
[ 0.664085] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.664086] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.664087] system 00:01: [io 0x0c6f] has been reserved
[ 0.664088] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.664089] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.664090] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.664091] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.664092] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.664093] system 00:01: [io 0x0b00-0x0b0f] has been reserved
[ 0.664094] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.664095] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.664096] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.664098] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.664213] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.664462] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.664647] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.664764] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.664766] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.664900] system 00:06: [mem 0x000ce800-0x000cffff] has been reserved
[ 0.664902] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.664903] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.664904] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.664905] system 00:06: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[ 0.664906] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.664907] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.664908] system 00:06: [mem 0x00100000-0xcfdeffff] could not be reserved
[ 0.664909] system 00:06: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 0.664910] system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 0.664911] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.664912] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.664913] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.664915] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.664927] pnp: PnP ACPI: found 7 devices
[ 0.671444] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.671462] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
[ 0.671463] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.671465] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.671467] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.671468] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.671470] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.671472] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.671473] pci 0000:00:04.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.671475] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.671477] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.671478] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 0.671480] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.671482] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.671484] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.671486] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 0.671490] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.671493] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref]
[ 0.671498] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.671499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.671500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.671501] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.671502] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window]
[ 0.671503] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.671504] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.671505] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.671505] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.671506] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.671507] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.671508] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.671509] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.671510] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.671511] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.671511] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.671512] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref]
[ 0.671513] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.671514] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.671515] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.671516] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.671516] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff window]
[ 0.671560] NET: Registered protocol family 2
[ 0.671687] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.671816] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.672033] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.672073] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.672112] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.672190] NET: Registered protocol family 1
[ 1.041328] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.041461] PCI: CLS 64 bytes, default 64
[ 1.041506] Unpacking initramfs...
[ 1.108296] Freeing initrd memory: 6744K (ffff8800372c3000 - ffff880037959000)
[ 1.108299] PCI-DMA: Disabling AGP.
[ 1.108345] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.108345] PCI-DMA: using GART IOMMU.
[ 1.108347] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.111870] perf: AMD NB counters detected
[ 1.111966] LVT offset 0 assigned for vector 0x400
[ 1.112001] perf: AMD IBS detected (0x000000ff)
[ 1.112048] Scanning for low memory corruption every 60 seconds
[ 1.112558] Initialise system trusted keyrings
[ 1.112676] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.114214] zbud: loaded
[ 1.114645] Key type asymmetric registered
[ 1.114685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.114717] io scheduler noop registered
[ 1.114717] io scheduler deadline registered
[ 1.114725] io scheduler cfq registered
[ 1.114751] io scheduler bfq registered (default)
[ 1.114751] BFQ I/O-scheduler: v8r11 (with cgroups support)
[ 1.115144] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.115149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.115155] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.115156] vesafb: scrolling: redraw
[ 1.115157] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.115165] vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90001200000, using 1216k, total 1216k
[ 1.118085] Console: switching to colour frame buffer device 80x30
[ 1.120902] fb0: VESA VGA frame buffer device
[ 1.121103] GHES: HEST is not enabled!
[ 1.121162] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.141752] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.142062] Linux agpgart interface v0.103
[ 1.142363] rtc_cmos 00:02: RTC can wake from S4
[ 1.142464] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.142496] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.142540] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.142707] NET: Registered protocol family 10
[ 1.142884] NET: Registered protocol family 17
[ 1.143136] microcode: CPU0: patch_level=0x0600081c
[ 1.143142] microcode: CPU1: patch_level=0x0600081c
[ 1.143150] microcode: CPU2: patch_level=0x0600081c
[ 1.143157] microcode: CPU3: patch_level=0x0600081c
[ 1.143188] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.143293] registered taskstats version 1
[ 1.143302] Loading compiled-in X.509 certificates
[ 1.143312] zswap: loaded using pool lzo/zbud
[ 1.143565] Magic number: 5:130:166
[ 1.143566] hash matches drivers/base/power/main.c:1359
[ 1.143624] rtc_cmos 00:02: setting system clock to 2017-06-25 06:09:01 UTC (1498370941)
[ 1.143650] PM: Hibernation image not present or could not be loaded.
[ 1.144553] Freeing unused kernel memory: 1280K (ffffffff81b0f000 - ffffffff81c4f000)
[ 1.144554] Write protecting the kernel read-only data: 10240k
[ 1.145009] Freeing unused kernel memory: 1900K (ffff880001625000 - ffff880001800000)
[ 1.145165] Freeing unused kernel memory: 88K (ffff8800019ea000 - ffff880001a00000)
[ 1.151259] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 1.152794] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.152830] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.153289] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.153307] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.156089] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.156101] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.156105] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.156272] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.156282] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.175298] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.202178] SCSI subsystem initialized
[ 1.204719] libata version 3.00 loaded.
[ 1.205142] ACPI: bus type USB registered
[ 1.205169] usbcore: registered new interface driver usbfs
[ 1.205181] usbcore: registered new interface driver hub
[ 1.205209] usbcore: registered new device driver usb
[ 1.205612] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.205931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.205932] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.206092] ehci-pci: EHCI PCI platform driver
[ 1.207262] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.207267] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.207341] xhci_hcd 0000:02:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[ 1.207617] hub 1-0:1.0: USB hub found
[ 1.207623] hub 1-0:1.0: 1 port detected
[ 1.207703] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.207705] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.207720] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.207823] hub 2-0:1.0: USB hub found
[ 1.207830] hub 2-0:1.0: 4 ports detected
[ 1.207866] scsi host0: pata_atiixp
[ 1.208181] scsi host1: pata_atiixp
[ 1.208234] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.208235] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.208454] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.208459] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.208462] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.208471] ehci-pci 0000:00:12.2: debug port 1
[ 1.208520] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.210613] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.210614] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.221193] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.221352] hub 3-0:1.0: USB hub found
[ 1.221357] hub 3-0:1.0: 6 ports detected
[ 1.221666] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.221670] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.221672] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.221684] ehci-pci 0000:00:13.2: debug port 1
[ 1.221724] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.234706] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.234914] hub 4-0:1.0: USB hub found
[ 1.234919] hub 4-0:1.0: 6 ports detected
[ 1.235071] ahci 0000:00:11.0: version 3.0
[ 1.235284] ohci-pci: OHCI PCI platform driver
[ 1.235288] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.235290] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.235922] scsi host2: ahci
[ 1.236032] scsi host3: ahci
[ 1.236135] scsi host4: ahci
[ 1.236237] scsi host5: ahci
[ 1.236287] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.236289] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.236290] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.236292] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.236420] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.236425] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.236460] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.295541] hub 5-0:1.0: USB hub found
[ 1.295549] hub 5-0:1.0: 3 ports detected
[ 1.295760] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.295763] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 6
[ 1.295776] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.355534] hub 6-0:1.0: USB hub found
[ 1.355543] hub 6-0:1.0: 3 ports detected
[ 1.355750] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.355754] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.355781] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.393441] ata2.01: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.398371] ata2.01: configured for UDMA/100
[ 1.404205] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.415499] hub 7-0:1.0: USB hub found
[ 1.415508] hub 7-0:1.0: 3 ports detected
[ 1.415712] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.415715] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 8
[ 1.415729] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.464707] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.478795] hub 8-0:1.0: USB hub found
[ 1.478805] hub 8-0:1.0: 3 ports detected
[ 1.479002] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.479006] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 1.479019] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.531278] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.538770] hub 9-0:1.0: USB hub found
[ 1.538777] hub 9-0:1.0: 2 ports detected
[ 1.548755] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.548818] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.548873] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.663029] hub 1-1:1.0: USB hub found
[ 1.663347] hub 1-1:1.0: 4 ports detected
[ 1.704635] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.705186] ata3.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[ 1.705187] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.705835] ata3.00: configured for UDMA/100
[ 1.706032] scsi 2:0:0:0: Direct-Access ATA WDC WD10EZEX-08M 1A01 PQ: 0 ANSI: 5
[ 1.743059] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.743061] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.743144] sd 2:0:0:0: [sda] Write Protect is off
[ 1.743146] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.743179] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.754625] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 1.758394] sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.758395] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.758512] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.764108] sda: sda1 sda2 sda3 sda4
[ 1.764484] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.934581] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.943751] usbcore: registered new interface driver usbhid
[ 1.943752] usbhid: USB HID core driver
[ 1.944216] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:1A2C:2124.0001/input/input1
[ 1.997953] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:12.0-1/input0
[ 2.000636] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.1/0003:1A2C:2124.0002/input/input2
[ 2.054805] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:12.0-1/input1
[ 2.131312] tsc: Refined TSC clocksource calibration: 4218.658 MHz
[ 2.131321] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3ccf3b7ad3a, max_idle_ns: 440795399591 ns
[ 2.441306] usb 5-2: new low-speed USB device number 3 using ohci-pci
[ 2.622731] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:046D:C077.0003/input/input3
[ 2.622782] hid-generic 0003:046D:C077.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0
[ 3.144828] clocksource: Switched to clocksource tsc
[ 4.238061] floppy0: no floppy controllers found
[ 4.275030] random: fast init done
[ 4.441892] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.059152] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.093415] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.093522] systemd[1]: Detected architecture x86-64.
[ 5.096688] systemd[1]: Set hostname to <anton-pc>.
[ 5.627276] systemd[1]: Listening on udev Control Socket.
[ 5.627598] systemd[1]: Created slice System Slice.
[ 5.627675] systemd[1]: Created slice system-getty.slice.
[ 5.627745] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.628126] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.628540] systemd[1]: Mounting Debug File System...
[ 5.628641] systemd[1]: Created slice User and Session Slice.
[ 5.779720] random: crng init done
[ 6.009388] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 6.012200] nvidia: loading out-of-tree module taints kernel.
[ 6.012206] nvidia: module license 'NVIDIA' taints kernel.
[ 6.012206] Disabling lock debugging due to kernel taint
[ 6.026474] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.026563] nvidia-nvlink: Nvlink Core is being initialized, major device number 247
[ 6.026575] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.66 Mon May 1 15:29:16 PDT 2017 (using threaded interrupts)
[ 6.643451] [drm] Initialized
[ 6.653408] acpi_cpufreq: overriding BIOS provided _PSD data
[ 6.668288] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.66 Mon May 1 14:33:30 PDT 2017
[ 6.728661] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 6.868416] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160831/utaddress-247)
[ 6.868426] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.868756] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.868762] ACPI: Power Button [PWRB]
[ 6.868898] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.868901] ACPI: Power Button [PWRF]
[ 6.873717] wmi: Mapper loaded
[ 6.881097] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.881232] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
[ 6.881255] sp5100_tco: failed to find MMIO address, giving up.
[ 7.012885] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.013791] parport_pc 00:04: reported by Plug and Play ACPI
[ 7.013877] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.311037] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 7.637480] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 7.637491] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 7.675335] snd_hda_codec_via hdaudioC0D0: autoconfig for VT2020: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:line
[ 7.675350] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.675353] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[ 7.675355] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 7.675357] snd_hda_codec_via hdaudioC0D0: dig-out=0x2e/0x0
[ 7.675359] snd_hda_codec_via hdaudioC0D0: inputs:
[ 7.675362] snd_hda_codec_via hdaudioC0D0: Front Mic=0x29
[ 7.675365] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x2b
[ 7.675367] snd_hda_codec_via hdaudioC0D0: Line=0x2a
[ 7.682990] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 7.691901] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 7.692397] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 7.692457] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 7.692516] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 7.692575] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 7.692632] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 7.720585] r8168 Gigabit Ethernet driver 8.044.02-NAPI loaded
[ 7.720608] r8168 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.742097] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 7.742108] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 7.774846] systemd-journald[185]: Received request to flush runtime journal from PID 1
[ 8.469213] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 8.469302] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 8.469388] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 8.469472] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 8.739627] ppdev: user-space parallel port driver
[ 8.836451] r8168 0000:03:00.0 enp3s0: renamed from eth0
[ 9.047009] AVX version of gcm_enc/dec engaged.
[ 9.047012] AES CTR mode by8 optimization enabled
[ 9.305482] kvm: disabled by bios
[ 9.333040] kvm: disabled by bios
[ 9.376277] kvm: disabled by bios
[ 9.419662] kvm: disabled by bios
[ 9.564796] EDAC MC: Ver: 3.0.0
[ 9.609150] MCE: In-kernel MCE decoding enabled.
[ 9.644926] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.646219] mousedev: PS/2 mouse device common for all mice
[ 9.734682] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.752708] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.753336] EDAC amd64: DRAM ECC disabled.
[ 9.753346] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 9.781821] EDAC amd64: DRAM ECC disabled.
[ 9.781826] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 9.822049] EDAC amd64: DRAM ECC disabled.
[ 9.822058] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.120802] microcode: CPU0: new patch_level=0x0600084f
[ 10.135559] microcode: CPU2: new patch_level=0x0600084f
[ 10.214835] floppy0: no floppy controllers found
[ 14.878364] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 14.879015] enp3s0: 0xffffc90000d01000, fc:aa:14:55:ad:f4, IRQ 28
[ 15.114268] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 17.763630] NVRM: Your system is not currently configured to drive a VGA console
[ 17.763631] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 17.763632] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 17.763634] NVRM: drivers including, but not limited to, vesafb, may result in
[ 17.763634] NVRM: corruption and stability problems, and is not supported.
[ 17.764390] nvidia-modeset: Allocated GPU:0 (GPU-74f96de4-91ce-f62e-cfbe-79a67b421e85) @ PCI:0000:01:00.0
[ 18.172735] r8168: enp3s0: link up
[ 18.172779] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 24.019273] fuse init (API version 7.26)
[ 2175.607105] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd
[ 2176.263151] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x232B pid 0x1810
[ 2176.263207] usbcore: registered new interface driver usblp
[ 2311.098073] usblp0: removed
[ 2311.101485] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x232B pid 0x1810
[ 3532.060155] usblp0: removed
[ 3542.053976] usblp 1-1.3:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x232B pid 0x1810
[ 5384.197783] cpufreq-bench[9273]: segfault at 0 ip 00007fb1c1cd2f34 sp 00007ffc76743130 error 4 in libc-2.25.so[7fb1c1c6b000+19c000]
[ 6853.509538] cpufreq-bench[10295]: segfault at 0 ip 00007fc8240faf34 sp 00007ffd84ea6f70 error 4 in libc-2.25.so[7fc824093000+19c000]
Есть подозрение, что это связано исключительно с процессором.
И nvidia-settings не видит xorg.(лол)
Спойлер
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found

Заранее спасибо за помощь.
БодрыйШурик
Сообщения: 25

  • 1

Сообщение #2735 grayich » 25.06.2017, 19:53

БодрыйШурик, запусти мониторинг системы, например atop с записью в файл, после чего осмотри чего происходит при игре с загрузкой системы.
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Сообщение #2736 БодрыйШурик » 25.06.2017, 20:27

Пока заметил, что вначале нагрузка на ядра очень низкая(около 20%) и идут подлагивания,
потом скачет до 60% и всё становится довольно неплохо.
Хотя я всё равно не понимаю, почему ядра нормально не нагружаются, ибо очень редкие микрофризы остаются.
И такой прикол только в играх на source, пока что. В блек мезе тоже лагает.

Здесь вроде расписывают почему это происходит.
Хотя скрипт мне не помог. :P

Приложил файл с выхлопом
Вложения
vihlop.tar.gz
(270 КБ) Скачиваний: 5
БодрыйШурик
Сообщения: 25

Сообщение #2737 Юрий Небесный » 25.06.2017, 20:33

grayich писал(а):сегодня обновился gimp-git
а я такой утром запускаю комп, и гимп обновляется, и я такой не понимаю что происходит :-~
А оно вон че! Починили :oD
В любом случае, спасибо что помог, я вот такой фон слабацал под проект колеса обозрения


Изображение
Elementary OS Loki | Dell Inspiron 7000 | Wacom
Донат в Blender Foundation, всего: 29 €
Дизайн в linux: http://vk.com/designlinux
Юрий Небесный M
Аватара
Сообщения: 1244

Сообщение #2738 grayich » 25.06.2017, 20:40

Юрий Небесный писал(а):вот такой фон слабацал под проект колеса обозрения
такой контраст по освещению, парка и колеса) прям ужастиком потянуло)
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Сообщение #2739 Юрий Небесный » 26.06.2017, 11:24

grayich писал(а):такой контраст по освещению, парка и колеса) прям ужастиком потянуло)
На колесе будет архитектурная подсветка, считается прямо сейчас, она очень яркая. А парк приглушили исходя из ее яркости.

Добавлено спустя 3 часа 32 минуты:
А есть ли способ заставить тимвивер, да и вообще программы разные, которые запускаются автозапуском с системой, заставить их свернутыми запускаться?
Elementary OS Loki | Dell Inspiron 7000 | Wacom
Донат в Blender Foundation, всего: 29 €
Дизайн в linux: http://vk.com/designlinux
Юрий Небесный M
Аватара
Сообщения: 1244

  • 1

Сообщение #2740 grayich » 26.06.2017, 15:26

Юрий Небесный, да, зависит от оболочки, в каждой оболочке решается по разному, в самых "развитых" обычно достаточно сохранить сессию, после чего при загрузке будет восстановлена сессия на техже раб столах и в том же положении
x64 Linux
grayich M
Аватара
Откуда: Харьков
Сообщения: 4075

Пред.След.

Вернуться в Оффтопик

Кто сейчас на форуме (по активности за 5 минут)

Сейчас этот раздел просматривают: 3 гостя